That is, boiler capacity or boiler output, in general, should be close to the maximum amount of steam used in production or life, or with heat. The maximum amount of steam or heat used in life is generally about 80% of the boiler's rated evaporation, which is the most suitable. However, there are many factors that will affect the boiler operating conditions, such as pipe loss, boiler scale and so on.
也便是
4噸氣油工業鍋爐燃燒儲存量或水器壓力，似的的講講應表示生產或日常生活最好用汽量，還有是用脂肪含量。而日常生活最好用汽量或用脂肪含量，似的的則是水器電機額定功率化掉量的80%以上，也許是最適于的。不贏，有好多方向的條件，會作用到水器的電腦運行載荷，打個比方熱力管道消耗、水器水銹等。
In the case of the same evaporation capacity of the nameplate, the water supply temperature of the steam boiler is 20, 60, 90, 100 and 105, and the temperature of the water supply is different, and the evaporation capacity of the boiler is also very different. Therefore, this aspect should also be taken into consideration and should not be neglected.
壓縮空氣工業蒸氣鍋爐在標貼多效陸面減壓蒸餾相當的情況報告下，其供水管環境溫暖有20℃、60℃、90℃、100℃及105℃之分，供水管環境溫暖不同的，則工業蒸氣鍋爐的多效陸面減壓蒸餾也是不小的對比。以，這一邊面也需需要充分考慮到，無法被屏蔽。
Rated steam pressure of the steam boiler marked on the nameplate, should be better than the resistance and the production of steam supply pipe required working pressure for large sum. And we can not ignore the existence of the pipe resistance, this is because the rated steam pressure is higher, then the saturated steam temperature is relatively high, so that it will have an impact on the pipe resistance.
水蒸氣電廠鍋爐設備銘牌上所會標明的額定容量容量水蒸氣心理工作的氣壓，理應要比供汽線路內壓及做工作需用做工作心理工作的氣壓的合計大才行。但是，咱們不能忽視了線路內壓的具備，這是由于額定容量容量水蒸氣心理工作的氣壓較高話，因此其飽和水蒸氣環境溫度也是特別高的，也許可能會對線路內壓生成損害。
容果生物質蒸汽鍋爐熱傳遞范圍大語錄，那末其一定出力十分大且超工況學習能力強，反而則是相反的詞語。雖然，在儲電量不同的問題下，熱傳遞范圍大語錄，那末其廚房排煙溫濕度相對性要低一系，但生物質蒸汽鍋爐高效率則要高。
If the heating area of the boiler is large, then its output is relatively large and its overload capacity is strong. Otherwise, it is the opposite. In addition, in the same capacity, the heating area is large, then the exhaust temperature is relatively low, but the boiler efficiency is higher.
