Comprehensive inspection shall include at least the following items:
周全查檢應為涉及下面內容：
1., pot inspection: drum internal parts installation is correct, is there any tools or debris left in the furnace?. The manhole and hand hole can be closed before checking.
1.
6噸沸水鍋爐風機鍋內常規排查：鍋筒實物件安裝使用有無對的，有無有用具或雜質留下在爐內。經常規排查核實側后方可關了人孔、手孔。
2., outside the examination: the main inspection furnace, flue internal accumulation or blockage, the furnace internal wall is intact, whether there are cracks, convex brick, fall off phenomenon.
2.鍋外撿查：基本撿查爐膛、排煙道里面會不會有積蓄過久物或淤塞，爐膛內墻會不會完整，是否是裂痕、凸磚、松脫不良現象。
3. fire grate inspection: check the necessary gap between the movable part of the grate and the fixed part, and check whether the handle of the movable grate is free or not, whether it can reach the required position or not.
3.爐排常規撿查：主要的常規撿查爐排移動部份與固定好部份區間內的一定油隙，常規撿查移動爐排的扳下手柄推拉需不需要自由自在，可以起到要求角度。
4. fan inspection: to fan inspection, first hand plate, dynamic coupling or drive V-belt, inspection, inspection, movement, static two parts, whether there is friction, collision, stuck and other anomalies. Fan inlet control board switch should be flexible and tight.
4.引生產的軸流式風機體檢：對引生產的軸流式風機體檢，先手摸盤動梅花聯軸器或傳動系統三邊形帶，體檢體檢動、靜二部件有熱脹冷縮、碰撞測試、卡住等異樣實際情況。引生產的軸流式風機無線運營中心調整板啟閉應靈活性牢固。
5. other checks:
5.別的查：
Check all piping and valves in Sheung Shui system (including water treatment, boiler feed pump).
檢查抽水機系統(例如水處里、蒸氣鍋爐供水系統泵)全部的的輸送管道、閥體。
Check all piping and valves in the blowdown system.
審核廢氣機系統很多的管線、的閥門。
Check all piping and valves in the blowdown system.
檢修供汽體統全部的的管線、伐門及保溫層層。
Check the dust seal of the dust collector.
