1噸燃氣鍋爐運行過程中的問題有哪些？

1噸燃汽蒸氣鍋爐運轉時中的話題有哪種？

What are the problems in the running of a ton of gas boilers?

發生的在1噸天然氣水器溫暖低加熱上邊的溫暖低防的結垢不銹鋼性常見有如何幾點：有物理普通機械防的結垢不銹鋼性（如鹽酸能力于材料制），也會有電物理普通機械防的結垢不銹鋼性（似海蒸汽冷疑后與材料制能力）。這四種防的結垢不銹鋼性基本的情況在溫暖小于酸露點的壁上邊。減壓蒸餾加熱上邊的漏灰，但是還能減速防的結垢不銹鋼性。

In the steam boiler low temperature heating surface of low temperature corrosion mainly include such points: chemical corrosion (such as sulfuric acid ACTS on metal), also have electrochemical corrosion and metal) after (such as water vapor condensation. These two kinds of corrosion occur at the surface of the wall where the temperature is below the dew point. The soot that evaporates on the hot surface can sometimes accelerate corrosion.

改裝排氣管快慢慢的現象有以內幾個：出口值額濾心堵塞；配管的剖面積計算計算小了或線路很長；無線運營中心相對定位過濾裝置裝置網堵塞；逆止閥打沒開。改善相應情況的心思：修改出口值額濾心，修改剖面積計算計算更大的線路，或變短線路間隔；請理過濾裝置裝置網，在無線運營中心端裝一款暖空氣柴油濾清器；查逆止閥的螺旋彈簧。

The reasons for the slow exhaust are: the outlet filter is blocked; The length of the pipe is too small or the line is too long; The filter on the entrance is blocked; The reverse valve will not open. The solution to this problem is to replace the outlet filter, replace the larger section, or shorten the distance of the line. Clean up the filter and install an air filter at the entrance. Check the spring of the reverse valve.

除此范圍內飽和壓縮空氣煤氣鍋爐還輕松存在飽和壓縮空氣、供水管途徑損傷干涉現象：途徑不嚴重信息泄露時，傳出信號響動，保冷層潮氣或漏汽、滲水。途徑致裂工程時，傳出信號取得響動，并排出汽、水。飽和壓縮空氣或供水管數據水水的流量數據發生變化問題，致裂工程地方在數據水水的流量數據表前，數據水水的流量數據減低；在數據水水的流量數據表后來，則數據水水的流量數據增長。飽和壓縮空氣重壓或供水管重壓越來越低。供水管母管致裂工程時，工作爐水位線越來越低。

In addition, the steam boiler is also prone to the damage of steam and water pipes: when the pipe is slightly leaking, it makes a noise, moisture or leakage of moisture and water. When the pipe is blasting, a striking sound is made and the steam and water are expelled. The change of steam or feed water is abnormal, the blasting site is in front of the flowmeter, and the flow rate decreases. After the flowmeter, the flow increases. Steam pressure or water pressure is down. When blasting the jellyfish, the water level drops.

導致的這么多現狀的誘因具體有：蒸汽式式途徑超溫使用，蠕脹高出規則或使用時長太久，輕金屬效果大大減少。蒸汽式式途徑暖管不會充分，形成可怕水挑戰。供水平臺質量欠佳，導致的壁厚灼傷。供水平臺途徑局部位被蠕變使得壁厚減簿。供水平臺平臺使用不穩常，心理壓力振幅過大，的發生水挑戰或共振。配置、研制、質量和焊結欠佳等。來解決方式是：如供水平臺途徑流出不嚴重，會長期保持煤氣工業鍋爐供水平臺，且不繼沒多久便增大錯誤碼時，可長期保持瞬時長使用，早日付出緊急煤氣工業鍋爐，若錯誤碼日趨嚴重，簡單危機人身事故或專用設備安全保障時，則應停爐。

The main reason for these phenomena is that the steam pipeline overtemperature runs, the creep exceeds the standard or the running time, the metal strength decreases. The steam pipe is not sufficiently warm to produce a severe water shock. Poor quality of water supply causes corrosion of pipe wall. The area of the water supply pipe is washed away and the wall of the pipe is reduced. The water supply system runs abnormal, the pressure fluctuates too much, the water shocks or vibrates. Installation, manufacturing, material and welding. Solution is: if the water supply pipeline leak slightly, can maintain the boiler feed water, and does not quickly expanding failure, can maintain a short running, put into standby boiler as soon as possible, if the fault is deepening, direct threat to the personal or safety equipment, should be stopped.

如供水管通道靜爆，應以便早日將機械問題管線與系統軟件解列，若不可解列而又沒辦法保護汽包水溫時，亦應停爐。如水汽通道透漏偶爾，而致沒多久縮小機械問題時，可保持間歇間電腦運行，早日投放應急鍋爐風機；若機械問題誘發，一直不利人體或機器設備的安全時，則應停爐。