處理2噸蒸汽鍋爐的余熱回收問題的方法

加工處理2噸水蒸汽工業鍋爐燃燒的余熱收廢事情的辦法

Process 2 tons steam boiler heat recovery method

2噸蒸汽加熱生物質鍋爐中的余熱發源于水蒸氣生物質鍋爐的排出操作過程，一樣 的回收利于策略是用一些排出增加器持續排出水，接下來做好擴建宣泄，更快成型2次水蒸氣，接下來利于2次水蒸氣形成的熱能量做好加溫水的崗位。

In the steam boiler blowdown process of waste heat from the steam boiler, the general way of recycling is domestic sewage is collected by a drainage expander and then super-popular decompression, rapid formation of secondary steam, and then use the heat generated by the secondary steam for heating water.

并且這家的回收巧用手段留存三種問題。一號，終結排除液體燃煤飽和蒸汽水器的廢氣水從未隨身攜帶有個量電量，得不及合理性的巧用：二，天燃氣液體燃煤飽和蒸汽水器燃燒剛度差，起壓力差，只要是蒸汽加熱水溫暖有點高有一點，給水泵就會出現汽化熱，不嫩很很正常業務;3、，為確保很很正常的生產，必須 會耗不少的純凈水和能源。

But there are three problems with this recycling approach. First, eventually exhaust steam boiler sewage still carries a lot of energy, not the use of reasonable: second, gas steam boiler combustion intensity difference, differential pressure, as long as the condensate a slightly higher temperature, feed water pump will generate vaporization, not the normal work of the tender; Third, to maintain normal production, it takes a lot of running water and fuel.

為防止傳統性壓縮氣電爐的回籠的方法，可選擇左右四種的方法。一、種，從氣加熱器橫豎手。用以超對流傳熱系數管主導要對流傳熱系數零件的氣加熱器，傳熱率led光通量98%以上的，比平民熱交流器高上非常多。此種氣加熱器機械裝修設計細密，占地上體積小，僅僅平民熱交流器的七分一種。的同時還可更有效盡量避免氣固兩相流對傳熱器的酸露點金屬腐蝕，提生該機械的操作使用時間。

In order to solve the traditional steam boiler recycling method, the following two ways can be adopted. The first is from the air preheater. Using superconducting heat pipe as the main heat transfer element, the heat transfer efficiency can be more than 98%, which is much higher than the ordinary heat exchanger. The air preheater is exquisitely designed, with a small footprint and only a third of the usual heat exchanger. At the same time, it can also effectively prevent the acid dew-point corrosion of the heat exchanger and improve the life of the equipment.

第二步種，從攪拌水收舊機器動手。通過抽真空、加壓力的室溫攪拌水收舊機器，可可以直接性將有一部電影分熱焓較高的閃蒸和室溫凝固水，選用室溫果汁攪拌收舊可以直接性收舊壓入蒸氣熱水鍋爐造成產汽——用汽——再產汽的閉路循環設計設計而加快了飽和蒸汽可行熱根據率。也削減了用電、鹽能的浪費，削減了蒸氣熱水鍋爐熱負荷，業績了很大軟水。